PREMIUM AIR SYSTEMS       

Restaurant and Industrial Hoods, Fans and Make-up Air units                

Call 877-430-0333   sales@premiumair.net  

FREE Shipping ANYWHERE in the lower 48 states from factories in:

North Carolina, Oklahoma, Iowa, Pennsylvania, California and Florida

FAN PRICING

GREASE FANS

BELT DRIVE

  Typical hood fans in chart below.

BELT DRIVE

MODEL

HP

CFM@ .75" WC

FAN PRICE

CURB PRICE

CURBSIZE (LXWXH)

PAE11  

 1/3

750

$746.00

$85.00

19.5X19.5X26

PAE13 

 1/2

1100

$778.00

$85.00

19.5X19.5X24

PAE15 

 1/2

1550

$818.00

$85.00

23X23X20

PAE15 

 3/4

1800

$833.00

$85.00

23X23X21

PAE15  

1   

2200

$861.00

$85.00

23X23X21

PAE18  

1   

2800

$966.00

$102.00

26.5X26.5X20

PAE20  

1 1/2

3400

$1,099.00

$102.00

26.5X26.5X14

Call  877-430-0333 for pricing on other sizes           FREE SHIPPING   Usually ships

 

All Direct Drive fans are available in 115/220 volt single phase

Belt Drive  PAE11-PAE15 Ύ  115/208 1 phase

Belt Drive PAE15-1 to PAE20-1.5 115/208 1Ψ  or  208/460 3Ψ


Air Volume: 400 - 20000 CFM
Maximum SP: 2.75" wg. standard air density
 

Features & Benefits
• A complete range of motors are available to meet specific site needs
• Heavy duty construction, durable and weather resistant
• Non-overloading backward inclined wheels, blades and inlets fabricated from 3003-H14 aluminum
• Wall mount applications, units up to 24” nominal wheel can be wall mounted
• Forced fresh air through the motor compartment cools motor and ensures long motor life
• Quick release latches allow for easy access to motor compartment
• Variable pitch motor pulley allows for field adjustment and system balancing
• High efficiency combined with low tip speeds result in quiet operation
• Standard external disconnect switch. 

Options
• Gravity Damper (UL 705 Only)
• Motorized Damper (UL 705 Only)
• Wall Mount Sleeve
• Roof Curb (Vented & Non-Vented)
• Grease Collection Box
• Bird Screen (UL 705 Only)
• Base Hinging Kit or Hinged Sub Base (for NFPA96 compliance)
• Extra Set of V-Belts
• Combination package that includes a supply fan mounted on the same roof curb 

Certifications
Premium Air Systems certifies that Models PAE08 thru PAE36 shown herein are licensed to bear the AMCA seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 211 and Publication 311, and comply with the requirements of the AMCA Certified Rating Program. Models PAE08 thru PAE36 are ETL Listed under file numbers 3049729-001 and 3049729-002 and comply with UL705 (electrical) and UL762 Standards and CSA Std C22.2, No 113. 

 

***Call us with any voltage – single or three phase and we will price it for you! ***

 

    We can help untangle the required exhaust, available transfer air dilemma to insure proper sizing of exhaust

     Fans and makeup air units…just give us a call.

 

 


 GREASE FANS

 DIRECT DRIVE

DIRECT DRIVE W/ SPEED CONTROLLER

MODEL

HP

CFM@ .75" WC

FAN PRICE

CURB PRICE

CURBSIZE (LXWXH)

PAE30D 

 1/4

500

$540.00

$85.00

19.5X19.5X26

PAE33D 

 1/3

800

$552.00

$85.00

19.5X19.5X26

PAE50D 

 1/2

950

$628.00

$85.00

19.5X19.5X24

PAE85D 

 3/4

1800

$702.00

$85.00

23X23X22

 

 

 

 

 

 

 FREE SHIPPING                                     Usually ships within 2 weeks  

 

PREMIUM AIR SYSTEMS PAE-D SERIES DIRECT DRIVE GREASE RATED FANS

Air Volume: 41 - 3489 CFM
Maximum SP: 2.48" wg. standard air density
 

Features & Benefits
• Completely enclosed drive compartment protects motor from airborne contaminants
• Forced fresh air through the motor compartment cools motor and ensures long motor life
• Variable Speed Control on Single Phase Units Only (VFDs required to adjust speed for 3 phase versions)
• Non-overloading backward inclined wheels, blades and inlets fabricated from 3003-H14 aluminum
• All sizes can be wall mounted
• Quick release latches allow for easy access to motor compartment (Size 12 & larger)
• Standard emergency disconnect switch (Size 12 & larger) 


 

Options
• Gravity Damper (UL705 Only)
• Motorized Damper (UL705 Only)
• Wall Mount Sleeve
• Roof Curb (Vented and Non-Vented)
• Grease Collection Box (Size 12 & larger)
• Bird Screen (UL705 Only)
• Base Hinging Kit or Hinged Sub Base (for NFPA96 compliance)
• Combination package that includes a supply fan mounted on the same roof curb 

Certifications
Premium Air Systems certifies that Model PAE10-D thru PAE85-D shown herein are licensed to bear the AMCA seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 211 and Publication 311, and comply with the requirements of the AMCA Certified Rating Program. Models PAE10-D thru PAE85-D are ETL Listed under file number 3049729-002 and comply with UL705 (electrical) Standards and CSA Std C22.2, No 113. Models PAE12-D thru PAE85-D are ETL Listed under file number 3049729-001 and comply with UL762 Standards. 

 


  

PREMIUM AIR SYSTEMS UTILISET PAEU GREASE RATED FANS

Call  877-430-0333 for pricing                              FREE SHIPPING

Air Volume: 200 - 7000 CFM
Maximum SP: 2" wg. standard air density
 

Features & Benefits
• Only available in direct drive with variable frequency drives included
• Handles high temperature, heavy grease applications
• Curb mounted design
• Exceptional performance. Handles up to 7000 CFM and 2.0” w.g. static pressure
• Ventilated motor housing for motor, shaft and drive protection
• Rigid motor plate assembly
• Non-overloading, welded steel backward inclined wheel is statically and dynamically balanced and permits usage on high static pressure applications
• Balancing weights are mechanically fastened
• Heavy duty bearings in excess of 200,000 hours of operation
• Motor base and shaft seals provide a double layer of protection to eliminate water leaks into the building and grease build-up on motor
• Grease laden air does not enter the motor compartment, increasing the life of the motor and allowing use on high temperature and grease applications
• Discharge section continuously welded to avoid grease leakage
• Continuously welded scroll to prevent grease leakage onto the rooftop
• Grease drain centered and fully welded onto discharge elbow
• Newly engineered hinged base for improved installation 

Certifications
Models PAEU-13 thru PAEU-24 have been certified by ITS. This certification mark indicates that the product has been tested to and has met the minimum requirements of a widely recognized (consensus) U.S. products safety standard, that the manufacturing site has been audited, and that the applicant has agreed to a program of periodic factory follow-up inspections to verify continued performance. Models PAEU13 through PAEU 24 are UL Listed for the removal of smoke and grease laden vapors, UL762 and UL705 and are in conformance with NFPA96. 


 

   

 PREMIUM AIR SYSTEMS UTILISET PAEBI GREASE RATED UTILISET FANS

Call  877-430-0333 for pricing                             FREE SHIPPING

Air Volume: 2 - 25999 CFM
Maximum SP: 2" wg. standard air density
 

Features & Benefits
• Full AMCA CLASS 1 operation
• Vented motor cover for weather protection
• UL762 Listed for restaurant duty
• Upblast discharge directs air away from floor
• Continuously welded housing
• Easily accessible clean out door
• 2” grease drain will not clog
• Fan is moisture resistant for high humidity applications 

Options
• Heat Slinger
• Shaft Seal
• Emergency Disconnect Switch
• Vibration Isolators 

Certification

Premium Air Systems certifies that Models PAEBI10 thru PAEBI36 shown herein are licensed to bear the AMCA seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 211 and comply with the requirements of the AMCA Certified Rating Program. Models PAEBI10 thru PAEBI36 have been certified by ITS. This certification mark indicates that the product has been tested to and has met the minimum requirements of a widely recognized (consensus) U.S. products safety standard, that the manufacturing site has been audited, and that the applicant has agreed to a program of periodic factory follow-up inspections to verify continued performance. Models PAEBI10 through PAEBI-36 are UL Listed and are in compliance with UL762 Standards and NFPA96. 

 

 


 

PREMIUM AIR NON-GREASE FANS 

 

DIRECT DRIVE

NON-GREASE FANS ETL LISTED DOWN-BLAST FOR RESTROOMS,  

DISH HOODS, LOCKER ROOMS, GENERAL VENTILATION.

 

 

DOWNBLAST, DIRECT DRIVE W/ SPEED CONTROLLER, 120 VOLT

MODEL

HP

CFM@ .25" WC

FAN  PRICE

CURB PRICE

CURBSIZE (LXWXH)

EADR12H  

 1/4

100

$320.00

$85.00

17.5X17.5X16

EADR30H  

 1/4

400

$352.00

$85.00

19.5X19.5X16

EADR33H  

 1/3

700

$363.00

$85.00

10.5X19.5X16

EADR50H  

 1/2

1000

$437.00

$85.00

19.5X19.5X16

EADR85H  

 3/4

1600

$501.00

$85.00

23X23X16

Call  877-430-0333 for pricing on other sizes             FREE SHIPPING  Usually ships within 2 weeks

 

Air Volume: 51 - 3395 CFM
Maximum SP: 2.47" wg. standard air density
 

Product Overview
Centrifugal Direct Drive Fans are designed to pull more air under higher static pressures. The efficient, balanced wheel and air inlet design contribute to maintaining low noise levels and extended motor life. These fans are especially suited for installation in hospitals, schools, motels and hotels, auditoriums, office buildings and light industrial areas. 

Features & Benefits
• Spun aluminum housing for rust-free, weather resistant durability
• Standard bird screen
• Non overloading backward inclined wheels, blades and inlets fabricated from 1100-H14 aluminum
• All sizes can be wall mounted
• Wire conduit to provide a clear channel for electrical connections
• Safety Disconnect
• Variable speed control 

Options
• Gravity Damper
• Motorized Damper
• Wall Mount Sleeve
• Roof Curb 

Certifications
Premium Air Systems certifies that Model EADR10-H thru EADR85-H shown herein are licensed to bear the AMCA seal. The ratings shown are based on tests & procedures in accordance with AMCA Publication 211 and Publication 311, and comply with the requirements of the AMCA Certified Rating Program. Models EADR10-H thru EADR85-H are ETL Listed under file number 3049729-002 and comply with UL705 (electrical) Standards and CSA Std C22.2, No 113. 

 

 

Premium Air Systems, Inc. Main office - 1051 Naughton Dr. Troy Mi. 48083